News to Use‎ > ‎New Skier Tips‎ > ‎

Waxing Tips

A good work place for waxing and scraping is a must. Also, something (e.g., newspaper, plastic, or a tarp) to catch wax scrapings is a good idea. VENTILATE!

Most serious waxers need a ski bench or a ski form to work on. Ski forms can be purchased or made. If you are interested in making your own ski waxing form out of 2"x6" lumber, talk with your coach or one of the wax clinic organizers for a pattern.

Waxing Iron (for glide wax)

A good waxing iron sells for about $100. These irons provide stable temperatures and they are adjustable for the range of temperatures (100C to 180C or 212F to 356F) needed to melt ski waxes. A standard travel iron (estimated cost = $25-$35) can also be used to wax skis. It is important to have a flat, smooth bottom and reliable temperature settings. Irons with holes in the bottom are not recommended because the wax from your last wax job will collect in the holes and contaminate your next wax job. Some ski shops will calibrate your iron free of charge so that you do not burn your ski bases.


To start out, pick one major brand of waxes and learn their waxing system. Some major brands that are available locally are Swix, Toko, Holemkol, Start, and Star. Several of these companies publish good information pamphlets. See one of the Ski Shops for them.

Your local ski shops can recommend a basic selection of kick waxes to get you started. For skiers that are just learning about waxing, the Toko system may be easier to learn because their waxes cover a broad range of snow temperatures. The third type of wax that you will eventually become familiar with but may not need right away is klister. These are very sticky waxes that are sued with or in place of kick waxes when the ski conditions are very icy and/or warm and wet.

Wax Scrapers

1 - plexi scraper - 4-5mm thickness
1 - metal scraper (use cautiously, this one can do permanent damage)
1 - groove scraper (plastic)

Cork - synthetic or natural for rubbing in kick wax on classic skis

Brushes - 1 hard white nylon brush, one fine blue bristle brush and 1 brass brush

Liquid Wax Remover - (e.g. Swix Citrus Base Cleaner, 500-1000 ml or equivalent)
Caution - wax removers should be used in a well-ventilated area. It is usually used to wipe off old kick wax.

A supply of paper towels, clean cloth rages, or a roll of fiberlene cleaning towels for cleaning skis.

Sand paper (220 grit) - used occasionally with a sanding block to remove oxidized base material and prepare kick zone of classical skis for waxing.

Thermometer - pocket type used for measuring temperatures for waxing. When the temperature is below 32F, use the snow temperature for wax selection. Above 32 use the air temperature in the shade for waxing.

Ski straps or ski bones - keep your skis together and help protect you new wax job.

Ski Bag - provides protection to your skis and poles when they are being transported.


  1. FIRST - Get the correct pair of skis for you in relation to flex, size, weight, and ability.
  2. NEXT - Make sure your ski bases are in good condition. They should be flat and textured. This can be done by hand or by stonegrinding (at a local ski shop).
  3. Clean skis (optional). Scrape any storage or residual wax off the ski base with plastic or metla scraper. Spray with citrus wax remover and let sit for a few minutes then wipe down. Dry completely.
  4. THEN - Follow these simple steps.

GLIDE WAX (for skate and classic skis glide zones) :

Warning!!! Iron temperature should be only warm enough to melt wax, not smoking.

  1. Use wire(brass/copper) brush to clean out texture.
  2. Fibertex Pad (3M heavy duty stripping pad is a good one).
  3. Clean base by waxing and scraping warm.
  4. Crayon wax of the day to base and iron in.
  5. Cool 30-45 min. (hard waxes scrape warm).
  6. Scrape.
  7. Brush.

KICK WAX (for classic skis only):

Know and mark your kick Zone! (If you do not know your kick zone you can test your skis at one of the shops or wax long and see where the wax remains after a long ski.


How to web link


Classic Ski waxing pocket - how to guide - pdf document


  1. Clean off old wax w/putty knife and wax remover.
  2. Add 3-5 layers of wax of the day. Cork between layers to smooth out


  1. Clean off old wax.
  2. Sand kick zone with 180-220 grit sand paper.
  3. Iron or heat gun in a binder.
  4. Cool.
  5. Add layer of wax of the day. Cork and heat into binder.
  6. Add 4-6 layers of wax and cork between layers.
  7. If more kick is needed try:
  • More layers (thicken the pocket)
  • Longer kick zone (forward of kick zone)
  • Then try a warmer wax if A and B don't work.